Crown Steel Buildings® Panel Overlap Last 9" of panel is smooth - flat, no crimps Fits snugly together No struggle with assembly Saves 30-40% on erection time No caulking required for waterproofing	Competition's Panel Overlap Entire panel is crimped Does not fit snugly together Difficult to assemble Requires 30-40% more erection time More alignment needed with drift pins Caulking is required for waterproofing - very time consuming, as each overlap must have four rows of caulking to prevent leaks
Crown Steel Buildings® Panel Crimping Crimps are closer together and smaller in depth No buckling problems 25% increase in panel strength	Competition's Panel Crimping Crimps are farther apart and larger in depth Buckling problems Panels are weaker
Crown Steel Buildings® Hardware Grade 2 bolts - 500 hr salt spray test, JS Clear Coat (five times more rust resistant) Optional - Grade 8.2 bolts - 1500 hr salt spray test, JS Clear Coat More durable High strength Corrosion resistant	Competition's Hardware Some use zinc fasteners - no JS Clear Coat, not spray tested Less durable Low strength Not corrosion resistant
Crown Steel Buildings® Arch Specification Raw materials ordered to minimum specifications and tight tolerances Less tolerance variation AZ55 Galvalume® - 55% aluminum, 43.5% zinc, 1.5% silicone, direct warranty from steel mill High resistance against corrosion 35 year rust-through perforation limited warranty directly from the steel mill Studies show panel life is 40+ years Florida testing approval for high wind velocity, up to 150 mph. Florida approval number FL-5897	Competition's Arch Specification Raw materials ordered to nominal specifications and loose tolerances Greater tolerance variation AZ50 Galvalume® - 50% aluminum, 48.5% zinc, 1.5% silicone Low resistance against corrosion Only a 20 year warranty Some use galvanized zinc coating –no warranty No Florida testing approval
Crown Steel Buildings® Arch Material Rust through warranty Minimum yield = 55 ksi Manufactured in accordance with ASTM standards Manufactured in accordance with ASCE building codes 9"overlap of panels Two rows of bolts 16 gauge beam equivalent at overlap with two rows of bolts, 0.030 overlap over a 0.030 overlap = 0.060	Competition's Arch Material Minimum yield = 50 ksi Some do not meet ASTM standards Some do not meet ASCE building codes 7"overlap of panels Weaker overlap with one row of bolts
Crown Steel Buildings® Endwall Panel AZ55 - 55% aluminum, 43.5% zinc, 1.5% silicone 3 1/2" corrugation depth 35 year rust-through perforation limited warranty directly from the steel mill Direct warranty from steel mill Florida testing approval for high wind velocity, up to 150mph. Florida approval number FL-5898 High resistance against corrosion From a minimum of 22 gauge to 20, 18, 16, and 14 gauge, depending on wind loads and snow loads	Competition's Endwall Panel AZ50 - 50% aluminum, 48.5% zinc, 1.5% silicone Only a 20 year warranty No Florida testing approval Low resistance against corrosion
Crown Steel Buildings® Color Options Endwalls Polyester silicon or paint with endwalls 26 gauge, 80,000 ksi - galvanized C-channel framing Florida testing approval for high wind velocity, up to 150 mph. Florida approval number FL-3895 Paint warranty of 40 years against Chipping Blistering Cracking Pealing Designed to withstand the strictest of wind codes	Competition's Panel Color Options Endwalls No color endwalls No Florida testing approval Not designed to withstand the strictest of wind codes
Crown Steel Buildings® Panel Manufacturing Manufacturing plant is located in the United States –Pittsburgh, PA Comply with all U.S. state and federal laws Leadership has over 40 years of experience Largest manufacturer of arch buildings in the world	Competition's Panel Manufacturing Warranty is subject to the guidelines of a foreign country Because they manufacture outside of the USA they are not subject to state and federal laws Leadership has less years of experience Warranty problems are headaches - some claims must be made in foreign countries

For details and pricing information - Click here

With Crown Steel Buildings® you get all this and more!

• World's most durable pre-engineered building designed to withstand the harshest weather conditions on earth including heavy snow, hurricanes, tornadoes and even earthquakes
• 35 year perforation guarantee backed.
• 40 year warranty on the paint
• Maximum usable space for minimum financial investment
• Completely clear span with no beams or posts to get in the way
• Completely fire resistant
• No rotting wood
• Designed by the best engineering professionals.
• Remarkably affordable
• Voted superior to similar style buildings
• Made from the highest quality, heaviest-gauge commercial steel available
• Simple bolt-together construction
• Easily expanded to any length
• Completely maintenance free
• Fire resistant
• Computer aided design and manufacturing
• Every building custom made to customer specifications
• Friendly and highly skilled customer service personnel
• Highly versatile, perfect for virtually any commercial, industrial, or consumer application